How to Solve Deco Not Connecting to Internet?

The Deco mesh system provides extended network coverage in your house. you have to just connect one of the Deco units to the modem with Ethernet cable and connect other units to the parent unit, this is called TP Link Deco setup. Down here, you will get to know about how to fix Deco not connecting to internet by using some of the simple tips and solutions.

Solutions to Deco Not Connecting to Internet

Check Connected Hardware

One of the Deco units connects with the home modem with the help of Ethernet cable. So the cable must be in good condition. If the modem can’t send the internet signal to the Deco, then you should change the cable straight.

Also check the other deco units are connected to the router unit using the Deco app.

Change Deco Location

Optimal location for the networking devices are far from the electronic devices like microphones or microwave ovens. You must make sure that the modem, and Deco units are powered on at the optimal location.

If you find any electronic device nearby, then change the location of the networking devices.

Configuration Not Done

It can be happen that you didn’t configure the Deco device, which you can do with the help of given instructions;

• Connect your phone to the Deco network.
• Open Deco app, if you don’t have the app then download it from Play Store/App Store.

• In the app, you have to enter the Email ID and password to access the interface.
• After that, you will reach to the dashboard and configure all the settings of the Deco network.

Reboot Deco Mesh System

The rebooting process shut down all the system and turn it on again, this will refresh the networking device settings and networks. Let’s have a look how to reboot using two different methods;

• You have to find power button and press it twice to shut it down and turn it up (rebooting).
• The other method to restart the device is disconnect the power cord and connect it again in to the electric wall socket.

Reset Deco Device

The last option to solve the Deco not connecting to internet is reset the device by following some simple instructions; there are two methods to do that;

• Go to the Deco app in your phone and select Menu> Device> Remove Device.
• The other method to reset the device is long pressing the RESET button using a sharp object.

But, after the reset TP-Link Deco process, you have to configure the Deco device with the help of the Deco app or computer via tplinkdeco.net.

Update Firmware

Outdated firmware version can also troubles you with the same problem like Deco not connecting to internet. So, you should update it by following simple steps;

• Go to the Deco app in your phone.
• Select the Menu option and choose Firmware update option.
• Just tap on the Update button.

Here, you have learned about how to solve Deco not connecting to the internet problem with the help of simple tips and solutions.