Deco BE11000/BE65 Router, Satellite Keeps Disconnecting

Deco BE65 router is a part of the TP-Link Deco mesh system which connects with your modem or ISP socket. Recently, users are facing a problem related to connection between the Deco BE65 router and satellites. Here, we will provide you reasons why you are facing these kinds of troubles ‘Deco BE65 keeps disconnecting and how to fix it right away;

Problem:

User connected the Deco router to the home network using Access Point Mode but two of the satellites are dropping signal even not connected to the router. They also showing Deco red light, means internet is down.

Reasons:

• Deco mesh system is not configured correctly through the Deco login interface.
• Firmware version gone out of date can trouble you same mentioned issue.
• Deco child nodes (satellites) are not connected to the router via Deco app.

Now, have a look at solutions that you can use to fix the ‘Deco BE11000/BE65 router, satellite keeps disconnecting’ problem;

Solutions

We will provide you simple to apply and major troubleshooting tips below;

Open App and Connect Nodes Again

Access the Deco app and check that the nodes are connected to the router or not. If mesh system is not connected then press the Connect button again to start the connection.

Configure Deco Mesh System Again

It can happen that you haven’t configured the Deco correctly, like setting up its WiFi passwords, IP addresses, Frequency bands and more other settings. So, access the Deco app or Deco login interface and configure it again.

Update Firmware Latest Version

Outdated firmware version can also trouble your with the same problem, so update the Deco right now. Open the Deco app> go in to More tab> select Update option> select node and tap on the UPDATE button.

Reboot Deco BE65 Mesh Router

Reboot the router to refresh the settings. It can also dispel the error. To reboot just follow these two methods;

• Plug out the power adapter of the Deco and plug it in to the socket again.
• Find the power button on the router and press it two times.

Reset If No Solution is Working

If any above given solution don’t work, then you can reset the device and configure it again through Deco login interface or Deco app.

• Find the RESET pinhole button on the device.
• Press and hold for 5-10 seconds.
• The reset process will start.

You can also use the Deco app to reset the device;

• Open and access the Deco app.
• Select the node to reset.
• Tap on the MORE option.
• Select REMOVE button.

The End Lines

Here, you have learned about why you are facing the Deco BE11000/BE65 router, satellite keeps disconnecting problem. Then, you have read and learned solutions to fix it.