Complete Guide for TP-Link Deco AXE5300 Setup

TP-link produces a Deco series of the mesh systems, in which you will get to see a lot of the WiFi devices series. Deco XE5300 deco mesh system works on the AXE5300 network range. There a lot of the LED colors that you will see, which are Deco Blue light, white light, and green light. Its setup process is pretty easy, you just have to follow some instructions.

Deco AXE5300 Setup

There are two ways to configure and manage the mesh settings through the Deco login interface and Deco app in your phone. We will provide information about both the ways.

Deco App (Most Used)

• You have to download the Deco app in your phone which you can do using the Play Store or App Store.
• Access the app by using the username and password or you can use the Email ID, name and generate password

• In the dashboard, you have to select the Setup option and, fill all the details like model name, place where you have powered it on, other deco nodes and finish Deco AXE5300 setup.

Deco Interface (Web GUI)

• First connect the computer to the Deco network.
• Open the browser and search the tplinkdeco.net or IP 192.168.1.1.
• You will get to the Deco login page, where enter the username and password.

• Access the dashboard, and adjust all the settings of the Deco AXE5300.

You must learn how to update Deco and how to change its WiFi password.

Update and Password

It is an easy process to complete Deco XE5300 setup, you should know how to update and change the password of the network.

• To update, access Deco app> open Menu tab> select the firmware tab> choose the Deco node> tap on the Update.
• To change password, open and access the app> select Menu> choose Wireless networks> enter new password and username> SAVE changes.

Below, you will also learn about troubleshooting tips to dispel any setup error;

Troubleshooting Tips

• Make sure you use the cables which are in good conditions.
• Facing any internet issue, then you can scan the area in Deco app to confirm.
• Ensure that the deco nodes are in reach of the Deco router connected to the modem.
• Restart to refresh the TP-Link deco AXE5300 setup and settings.
• Reset if the problem is not fixed by using these above written tips.

End Conclusion

Here, we end the blog post, you have learned about how to complete the TP-Link deco AXE5300 setup with your phone or computer.