Deco Internet Password reset: full process

Did you ever have any of those nights when your internet is uncooperative and you find out you have locked yourself out of your network? You enter your normal password but it doesn’t work, and simple options like “Forgot Password” are not working. We are going to go through the steps in Troubleshooting and find out how to reset the deco (or your router) so you can be back online

This article covers all basic to advanced steps necessary for troubleshooting. The objective here is to give you a clear & concise answer to your question “how to reset deco” and see whether it No fixed design, only a direction to take.

Step 1: forget password / reset via the app.

• You should check whether your system allows resetting the passwords to a soft password first before you start taking any advanced steps.
• In the case of the TP-Link Deco eco system, you can frequently go to their application, choose Forgot Password, and provide your TP-Link ID (phone) and a reset link would be sent in your email.
• Or their cloud site / forget Reset the password through email.

In case that works, you will be able to access it without having to delete settings the ideal outcome.

Step 2: Basic Troubleshooting

Try factory resets, but first do some simple checks:

• Ensure that your mail is spelt right (a mistake with typing).
• Reset mail appears in the check spam/junk mail.
• Switch off WiFI and switch on the mobile data / alternate network to get reset links – the app occasionally has network connectivity problems. This workaround is reported by
• The link should be open in a different browser or device.

In case the app will not accept your new password as soon as you reset it, restart the device (phone) or the Deco/router .

Step 3: Factory reset

Soft resets are not always effective, which means that you are forced to delete the device settings and begin anew. The following is the method of restarting your system – say, how to reset deco:

• Find the Reset (or WPS/Reset) button on your Deco or router – therefore, it is a small pinhole.
• When the device is on, press and hold the button given on the back for a few seconds, to make LED(s) blink or show reset.
• Release the button and allow the device to boot.
• The admin login and the WiFi passwords return to default (and are usually nothing more than admin / admin) after reset.

Step 4: Reconfiguring the deco

After resetting it, you will be require to re-configure your network. Here’s what you do:

• Access Deco (or router) app or web portal.
• Configure: SSID (network name), WiFi password, administrator password.
• If you’re using a mesh network (two or more Deco nodes), add the secondary nodes again.
• Make sure the devices connect to the new WiFi password.

After that, re-entering the administration interface and reopening all sophisticated settings you had before (firewall rules, QoS, port forwarding etc.).

Real Problems of Troubleshooting

A restart is not always a smooth process. Here are common pain points:

• Some new default passwords have the issue of the app or web login still believing you are using your previous password after resetting (cache issues).
• Already connect devices may not automatically reconnect using new credentials – they will need to be manually add.
• In case your router / modem combo (provided by ISP) already had custom settings or double NAT, the reconfigured deco may conflict with them you will need to do some additional Troubleshooting.
• Assuming a large number of smart/IoT devices, it is difficult to replace WiFi password: all of them must be reconfigure.

After reset: test and verify

After everything has been set, test:

• Connect a phone / laptop with WiFi with the new password.
• log in using new admin password In admin interface.
• Test some common settings (e.g. open port, QoS) to test configuration persistence.

In case resets and reconfiguration once again cause both unsuccessful access or strange behavior it may be some hardware problem, bugs in firmware or account problem.

Final words

Changing your internet password (WiFi or admin password) is a tiresome & boring task: you have tried to create a password, only to find yourself locked out. However, bit-by-bit, you can save yourself by means of Troubleshooting, and then there is soft Reset, and then Full Factory Reset.

And never forget, the main thing with deco is not one thing, i.e. “how to reset deco” is a process: erase, rebuild, test, protect. With each time that you do it, you are reconstructing your network round and round.