Deco M9 Plus, Cannot Update Firmware on Main Deco: Fix

If you are an existing user of Deco M9 plus Mesh System and your deco main node shows pulsing green light, then it indicates the problem like your router requires a firmware update. It is not so difficult to update Firmware. If you facing issue, Deco M9 Plus, Cannot Update Firmware on Main Deco, then read and follow steps given below:

Download And Update the Firmware of Orbi Devices Manually.

To update the firmware of the Deco M9 main node, first you need to download the firmware files and then upload this file to the admin interface of the main router. Remember that the manually method is only used when there is a wired connection.

Steps to Download the Firmware

1. First, go to the web browser on your computer and visit the TP-Link deco official web site.

2. Here create account by using the Email ID and perform Deco Login process

3. Here, enter your main deco node’s serial number into the field and download the new firmware file.

4. After downloading, save it on the computer and unzip it.

After you download and save the firmware file, you need to upload it on both the admin panel of the main deco node.

Use the App to Firmware Update.

The easiest way to update the firmware of the Deco M9 mesh is through the TP-link deco mobile app. below are step-by-step instructions for downloading the app and updating the firmware.

1. Connect your mobile device to the network of the Deco mesh network.

2. Download and install the app from the Google Play Store or App Store; and open it.

3. Enter the default login that mentioned on label of deco main node. After login, a dashboard will open.

4. On the dashboard, tap on the top left corner of the mobile screen.

5. Here, tap on the router setting, and then tap on the firmware update.

6. Now follow the onscreen instruction to update the firmware.

By using the TP-Link Deco app, you can also update the firmware of the child nodes and other Deco devices that are configured with the app. To update the firmware update, you need to configure all the Deco M9 mesh devices to the Deco mobile app.

This way you can solve your problem of Deco M9 Plus, cannot update firmware on main deco.

Conclusion

For best security and performance, you should update the firmware on your Deco devices. Updating your firmware helps to prevent problems and ensures that your network functions properly. Hope all above steps are helpful for you to solve the problem of Deco M9 Plus, cannot update firmware on main deco.